|| Home ||

Laser Dreams Laser Light Shows


Laser Dreams Optical Gadgets






What we have here is Laser Dreams' Optical Gadgets. I have chosen a few items out of the Optics Cabinet to display here.
Please let me know if you are looking for something special and I will see if I have it or I may know where to find it.
Most of these are out of laser systems I have parted out. I have collected many wonderful goodies over the years.
I may have more than one of each item so let me know if you need more than one.
If you think I am off base on the price please feel free to make me a reasonable offer.



IMG_1663 IMG_1664
Laser beam position translator. Motorized arm pivots in the middle. X & Y adjustments. Removed from a Laserscope YAG. $35

IMG_1665 IMG_1666
Laser power meter with sampling optic. Pass a visible laser beam thru the hole and a small percentage of the beam will be measured by the silicon detector.
Has gain and offset adjustments for calibration. I have the schematic for it. Removed from a Laserscope YAG. $30

IMG_1667
Prism with mount. Use for laser reflection. More efficient than a mirror.
Very high power beams can be redirected. Removed from a Laserscope YAG. $20

IMG_1668
Optic rotated by a stepper motor. Removed from a Laserscope YAG. $20

IMG_1669 IMG_1670
Motor with gearbox (ratio 2420:1) mounted on an 'L' bracket with optic mount on shaft. Use to rotate optic effects in the laser beam.
Very slow (F/L RPM=0.45). Voltage/Current 12VDC @ 0.3A. $15

IMG_1671
Front surface mirror Mounted on adjustable mount. Removed from a BioPhysics picosecond pulsed YAG.$20

IMG_1672 IMG_1673
Two front surface mirrors mounted on adjustable mounts. Removed from a BioPhysics picosecond pulsed YAG.$30

IMG_1674 IMG_1675 IMG_1676
Two front surface mirrors mounted on adjustable mount. Removed from a BioPhysics picosecond pulsed YAG.$30

IMG_1678
Optic and aperture on a mount. Removed from a BioPhysics picosecond pulsed YAG.$15

IMG_1679 IMG_1681
Laser power meter with sampling optic. Pass a laser beam thru the hole and a small percentage of the beam will be
measured by the silicon detector. Has gain and offset adjustments for calibration. I have the schematic for it.
Removed from a BioPhysics picosecond pulsed YAG. $35

IMG_1682 IMG_1684 IMG_1685
Variable neutral density filter mounted on a 220VAC@17mA motor and gear box. Has a removable aperture.
Was the attenuator for the HeNe aiming beam of the BioPhysics picosecond pulsed YAG.$40

IMG_1686 IMG_1687
Rotary Shutter on mount. (Like a Ledex) Relay PCB with position detector.$25

IMG_1688
Rotary Shutter on mount with inclosure. (Like a Ledex) Relay PCB with position detector.$25

IMG_1689 IMG_1690
Optic at Brewster angle rotated by a linear motor. Motor like those use in remote cars and planes.
Used for attenuating a polarized laser beam. Removed from a BioPhysics picosecond pulsed YAG. $40


|| Home ||

[ Back ]